Models 3112, 3106B, 3119, 3115, 3117, 3116C Double-Ridged Waveguide Horn Antennas User Manual
10 | Introduction 7-TR Tripod—Constructed of PVC and fiberglass components, providing increased stability for physically large antennas. Th
Introduction | 11 MODEL 3112 POSITIONING SYSTEM The Model 3112 features an option for a fixed height pneumatic-assisted polarization positioning
12 | Introduction This page intentionally left blank.
Maintenance | 13 2.0 Maintenance Before performing any maintenance, follow the safety information in the ETS-Lindgren Product Information Bull
14 | Maintenance Part Description Part Number 7-TR Boom Assembly Options Boom Assembly, Antenna Mounting, Straight—Standard for general ant
Specifications | 15 3.0 Specifications Electrical Specifications MODEL 3112 Frequency Range 100 MHz—1 GHz VSWR Ratio (Average) < 1.6:1 Maxim
16 | Specifications MODEL 3119 Frequency Range 400 MHz—6 GHz VSWR Ratio (Average) 3.5:1 Maximum Continuous Power 800 W Peak Power 2500 W Impeda
Specifications | 17 MODEL 3116C Frequency Range 10 GHz—40 GHz VSWR Ratio (Average) 2.5:1 max Maximum Continuous Power 20 W @ 40 GHz 40 W @ 10 GHz
18 | Specifications MODEL 3115 Width 24.4 cm (9.6 in) Depth 27.9 cm (11 in) Height 15.9 cm (6.2 in) Approximate Weight 1.8 kg (4 lb) MODEL 3117
Mounting Instructions | 19 4.0 Mounting Instructions Before connecting any components or operating the Double-Ridged Waveguide Horn Antennas,
ii | ETS-Lindgren Inc. Although the information in this document has been carefully reviewed and is believed to be reliable, ETS-Lindgren does not as
20 | Mounting Instructions ATTACH MOUNTING BRACKET TO ANTENNA The Model 3117 Model and 3116C include a stinger mount for centerline rotation
Mounting Instructions | 21 ATTACH STINGER MOUNT (MODELS 3117 AND 3116C ONLY) The Model 3117 Model and 3116C include a stinger mount for centerli
22 | Mounting Instructions MOUNT ANTENNA AND BRACKET TO 4-TR 1. Attach the mounting bracket to the 4-TR by aligning the 1/4–20 connector on th
Mounting Instructions | 23 7-TR and Mast Mounting Options Due to the size of the Model 3112, do not mount it onto a 7-TR. For a list of 7-TR bo
24 | Mounting Instructions 2x2 Boom Mounting Options 2x2 boom refers to a typical 2-inch by 2-inch boom. Following are options for mounting a
Mounting a Model 3112 to the Optional Positioning System | 25 5.0 Mounting a Model 3112 to the Optional Positioning System Before connecting a
26 | Mounting a Model 3112 to the Optional Positioning System
Mounting a Model 3112 to the Optional Positioning System | 27 Connecting the Optional Positioning System Once the Model 3112 is securely mounted
28 | Mounting a Model 3112 to the Optional Positioning System Air Polarization Option Plug the ends of the twin air hoses into the two AIR O
Mounting a Model 3106 Series Antenna to a 7-TR | 29 6.0 Mounting a Model 3106 Series Antenna to a 7-TR Before connecting any components or ope
| iii Table of Contents Notes, Cautions, and Warnings ... v 1.0 Introduction .
30 | Mounting a Model 3106 Series Antenna to a 7-TR Step 2 Lift the mount adapter up and away from the boom. Step 3 Remove the wing
Mounting a Model 3106 Series Antenna to a 7-TR | 31 Retain these two screws for future use; if you remove the Model 3106B from the 7-TR, y
32 | Mounting a Model 3106 Series Antenna to a 7-TR Step 7 Attach the mounted assembly to the boom: Use the two 104136 knobs remove
Typical Data | 33 7.0 Typical Data Before placing into operation, follow the safety information in the ETS-Lindgren Product Information Bullet
34 | Typical Data
Typical Data | 35 Model 3106B
36 | Typical Data
Typical Data | 37 Model 3119
38 | Typical Data
Typical Data | 39
iv | 4-TR Mounting Instructions ... 19 Included Mounting H
40 | Typical Data Model 3115
Typical Data | 41
42 | Typical Data
Typical Data | 43 Model 3117
44 | Typical Data
Typical Data | 45
46 | Typical Data Model 3116C
Typical Data | 47
48 | Typical Data
Warranty | 49 Appendix A: Warranty See the Product Information Bulletin included with your shipment for the complete ETS-Lindgren warranty for
| v Notes, Cautions, and Warnings Note: Denotes helpful information intended to provide tips for better use of the product. Caution: Denotes a haza
50 | Warranty This page intentionally left blank.
Typical Measured Radiated Patterns | 51 Appendix B: Typical Measured Radiated Patterns Model 3106B
52 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 53
54 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 55
56 | Typical Measured Radiated Patterns Model 3119
Typical Measured Radiated Patterns | 57
58 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 59
vi | This page intentionally left blank.
60 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 61
62 | Typical Measured Radiated Patterns Model 3115
Typical Measured Radiated Patterns | 63
64 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 65
66 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 67
68 | Typical Measured Radiated Patterns Model 3117
Typical Measured Radiated Patterns | 69
Introduction | 7 1.0 Introduction The ETS-Lindgren family of Double-Ridged Waveguide Horn Antennas consists of linearly polarized broadband ant
70 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 71
72 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 73
74 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 75
76 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 77
78 | Typical Measured Radiated Patterns
Typical Measured Radiated Patterns | 79
8 | Introduction MODEL 3119 The Model 3119 Double-Ridged Waveguide Horn is a linearly polarized broadband antenna covering the frequency range
Introduction | 9 MODEL 3116C The Model 3116C Double-Ridged Waveguide Horn is a linearly polarized broadband antenna covering the frequency range
Comentários a estes Manuais